Kia Soul: Installation - Multifunction Switch - Body Electrical SystemKia Soul: Installation

Kia Soul 2014-2019 PS Service Manual / Body Electrical System / Multifunction Switch / Installation

1.
Install the multifunction switch.
2.
Install the clock spring.
3.
Install the steering column upper and lower shrouds.
4.
Install the steering wheel.
5.
Connect the negative (-) battery terminal.
  
Make sure the multifunction switch connectors are plugged in properly.
    Removal
    1. Disconnect the negative (-) battery terminal. 2. Remove the steering wheel. (Refer to Steering System - "Steer ...

    Inspection
    Lighting Switch Inspection 1. With the multi function switch in each position, make sure that continuity exists between the terminals below. If conti ...

    See also:

    Certification label
    The certification label is located on the driver's door sill at the center pillar. This label shows the maximum allowable weight of the fully loaded vehicle. This is called the GVWR (Gross ...

    Transaxle Control Module (TCM). Inspection
    TCM Problem Inspection Procedure 1. TEST TCM GROUND CIRCUIT: Measure resistance between TCM and chassis ground using the backside of TCM harness connector as TCM side c ...

    Cool box (if equipped)
    You can keep beverage cans or other items cool in the glove box. 1. Turn on the air conditioning. 2. Slide the open/close lever of the vent installed in the glove box to the open position. 3. ...