Kia Soul: Installation
When replacing a clutch housing or transaxle assembly, the wiring
bracket should be installed in accordance with the clutch housing type.
|
If the oil seal on the transaxle case side is damaged and fluid
is leaking, replace the oil seal with a new unit. When installing the
new oil seal, use the specialized tool (oil seal installer, 09431-26100).
|
1. |
Install in the reverse order of removal.
|
2. |
Adding manual transaxle fluid after Installing the manual transaxle.
(Refer to Manual Transaxle System - "Manual Transaxle Fluid")
|
Removal
1. Remove the air cleaner assembly and air duct. (Refer to Engine Mechanical System - "Air Cleaner") 2. Remove the battery an ...See also:
High Mounted Stop Lamp Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the high mounted stop lamp trim (A).
...
To turn cruise control off, do one of the following
Push the CRUISE ON-OFF button (the CRUISE indicator light in the instrument
cluster will go off).
Turn the ignition off.
Both of these actions will cancel the cruise control operation. If y ...
Side Airbag (SAB) Module. Description
The Side Airbags (SAB) are installed inside the front seat and protect
the driver and front passenger from danger when side crash occurs. The SRSCM
determines deployment of side airbag by usi ...