Kia Soul: Installation
1. |
Install in the reverse order of removal.
|
2. |
After be equipped, perform bleeding air procedure in clutch release
cylinder after pouring the brake fluid.
(Refer to Clutch System - "Clutch release cylinder")
|
Removal
1. Remove the clutch pedal mounting nuts (A). 2. Separate the push rod (C) after remove the pin (A) and washer (B). ...Clutch Tube
...See also:
Rear Wheel Speed Sensor. Removal
1.
Remove the rear wheel & tire.
Tightening torque:
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
...
Adding equipment to or modifying your air bag-equipped vehicle
If you modify your vehicle by changing your vehicle's frame, bumper system, front
end or side sheet metal or ride height, this may affect the operation of your vehicle's
air bag system. ...