Kia Soul: Installation - Clutch Switch - Clutch SystemKia Soul: Installation

Kia Soul 2014-2019 PS Service Manual / Clutch System / Clutch Switch / Installation

1.
Install in the reverse order of removal.
(1)
Tighten the nut with the specified torque.
Tightening torque:
2.0 ~ 4.0 N.m (0.2 ~ 0.4 kgf.m, 1.4 ~ 2.9 lb-ft)
  
After pressing the clutch pedal operation stroke to the position (D), turn the clutch switch lever to ON->OFF position (E) and then tighten the bolts (B) with specified torque.
Clutch pedal operation stroke (D)
Gasoline 1.6: 145 ± 3 mm(5.7087 ± 0.1181 in.)
Gasoline 2.0: 150 ± 3 mm(5.9055 ± 0.1181 in.)
Ignition lock switch ON->OFF position (E)
Gasoline 1.6: 72.5 ± 3 mm(2.8543 ± 0.1181 in.)
Gasoline 2.0: 75.0 ± 3 mm(2.9528 ± 0.1181 in.)

    Removal
    1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Disconnect the clutch switch connector (A). ...

    Clutch Pedal
    ...

    See also:

    Seat Heater Switch Installation
    First Row Seat 1. Install the heater & A/C control unit. (Refer to Heating, Ventilation And Air Conditioning - "Heater & A/C Control Uni ...

    Using the Tire Mobility Kit
    1. Detach the speed restriction label (0) from the sealant bottle (1), and place it in a highly visible place inside the vehicle such as on the steering wheel to remind the driver not to drive too ...

    Cluster Ionizer (FATC only) Inspection
    1. Press the MODE switch more then 4 times within 2 seconds while pressing the OFF switch. Display Fail description 00 ...