Kia Soul: Inhibitor Switch. Installation
1. |
Check that the shift lever is placed in the "N" position
|
2. |
Install the inhibitor switch (A).
|
3. |
Install the manual control lever (A).
|
4. |
Align the hole (A) in the manual control lever with the "N" position
hole (B) of the inhibitor switch and then insert the SST inhibitor switch
guide pin (09480-A3800).
|
5. |
Tighten the nut (A) and bolts (B) with the specified torque.
|
6. |
Remove the SST (09480-A3800) from the hole.
|
7. |
Connect the inhibitor switch connector (A).
|
8. |
Install the shift cable by tightening nut (B).
|
9. |
Push the shift cable to the arrow "F" to eliminate free play and
then tighten the nut (A) with the specified torque.
|
10. |
Install the air cleaner assembly.
(Refer to Engine Mechanical System - "Air cleaner")
|
11. |
Connect the battery negative (-) cable.
|
Inhibitor Switch. Removal
1. Place the shift lever into the "N" position. 2. Disconnect the battery negative (-) cable. 3. Remo ...Shift Lever. Components
1. Shift lever knob & boots aseembly 2. Shift lever assembly 3. Shift cable assembly 4. Shift cable retainer 5. Shift cable brakcet 6. Manual control lever ...See also:
ETC (Electronic Throttle Control) System. Description and Operation
Description
The Electronic Throttle Control (ETC) System consists of a throttle body
with an integrated control motor and throttle position sensor (TPS). Instead
of the traditional throttle ...
Spark Plug Installation
1.
Install in the reverse order of removal.
Tightening torque:
14.7 ~ 24.5 N.m (1.5 ~ 2.5 kgf.m, 10.8 ~ 18.0 Ib-ft)
...
Drive Belt Removal
1.
Disconnect the battery negative terminal.
2.
Loosen the alternator tension adjusting bolt (A) to loosen tension.
...