•
|
Put on gloves to protect your hands.
|
|
•
|
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related
parts, to prevent damage.
|
•
|
Use a plastic panel removal tool to remove interior trim
pieces to protect from marring the surface.
|
•
|
Take care not to bend or scratch the trim and panels.
|
|
1. |
Remove the front pillar trim.
(1) |
To remove the front pillar trim, the below tool (A) must
be used.
|
(2) |
Slightly spread open the front pillar trim and then place
the tool (A) on the mounting clip (B) like the picture below.
After placing the tool (A) on the mounting clip (B) push
it to the front.
• |
Once the front pillar trim has been removed,
replace the clips to new ones.
|
|
|
(3) |
Remove the front pillar trim (A).
A. |
Front Pillar Trim Mounting Method
|
• |
Remove the mounting clip (A) by turning
it clockwise.
|
|
|
|
2. |
Install in the reverse order of removal.
• |
Replace any damaged clips.
|
|
|
1. Center pillar lower trim
2. Center pillar upper trim
...
See also:
Front Wiper Motor Inspection
Speed Operation Check
1.
Disconnect the connector (A) from the wiper motor.
2.
Attach the positive (+) lead from ...
Driving off-road
Drive carefully off-road because your vehicle may be damaged by rocks or roots
of trees. Become familiar with the off-road conditions where you are going to drive
before you begin driving. ...
Components
1. Steering column assembly
2. Universal joint assembly
3. Steering gear box
...