Kia Soul: Front Hub / Knuckle Replacement
Kia Soul 2014-2019 PS Service Manual / Driveshaft and axle / Front Axle Assembly / Front Hub / Knuckle Replacement
1. |
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
|
2. |
Remove the front wheel and tire (A) from front hub.
|
3. |
Loosen the guide rod bolt (B) and pivot the caliper (A) up out
of the way.
|
4. |
Remove the brake pads (A).
|
5. |
Remove the brake caliper mounting bolts (A), and then place the
brake caliper assembly (B) with wire.
|
6. |
Loosen the front brake disc mount screw (B) and then remove the
front brake disc (A).
|
7. |
Remove driveshaft nut (A) from the front hub under applying the
break.
|
8. |
Remove the tie rod end ball joint (C) from the knuckle by using
the SST (09568-34000).
|
9. |
Loosen the mount bolt and then remove the wheel speed sensor (A)
from knuckle.
|
10. |
Loosen the bolt & nut and then remove the lower arm (A).
|
11. |
Disconnect the driveshaft (A) from the front hub assembly.
|
12. |
Loosen the strut mounting bolts (A) and then remove the knuckle
assembly (B).
|
Front Hub / Knuckle Components
1. Brake disc 2. Wheel hub assembly 3. Hub bolt 4. Dust cover 5. Knuckle 6. Hub bearing 7. Snap ring ...Front Hub / Knuckle Disassembly
1. Remove the snap ring (A). 2. Remove the hub assembly from the knuckle assembly. (1) Install the ...See also:
Valve clearance (if equipped)
Inspect for excessive valve noise and/or engine vibration and adjust if necessary.
An authorized Kia dealer should perform the operation. ...
Luggage net holder
To keep items from shifting in the cargo area, you can use the holders located
in the cargo area to attach the luggage net.
If necessary, contact your authorized Kia dealer to obtain a luggage ne ...
Fuel Pressure Control Valve. Repair procedures
Inspection
1.
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
2.
Disconnect the fuel pressure regulator valve ...