1. |
Install the hub bearing to the knuckle assembly.
(1) |
Lay the knuckle assembly (A) on press.
|
(2) |
Lay a new hub bearing upon the knuckle assembly (A).
|
(3) |
Lay a suitable adapter (B) upon the hub bearing.
|
(4) |
Install the hub bearing to the knuckle assembly by using
press.
|
- |
Do not press against the inner race of the hub
bearing because that can cause damage to the bearing
assembly.
|
- |
Always use a new wheel bearing assembly.
|
|
|
2. |
Install the hub assembly to the knuckle assembly.
(1) |
Lay the hub assembly (A) upon a suitable adapter .
|
(2) |
Lay the knuckle assembly (B) upon the hub assembly (A).
|
(3) |
Lay a suitable adapter (C) upon the hub bearing.
|
(4) |
Install the hub assembly (A) to the knuckle assembly (B)
by using press.
|
Do not press against the inner race of the hub bearing
because that can cause damage to the bearing assembly.
|
|
3. |
Install the snap ring (A).
|
1.
Remove the snap ring (A).
2.
Remove the hub assembly from the knuckle assembly.
(1)
Install the ...
1.
Check the hub for cracks and the splines for wear.
2.
Check the brake disc for scoring and damage.
3.
C ...
See also:
Auto Light Sensor Installation
1.
Reconnect the auto light connector.
2.
Install the auto light sensor.
...
Notes on the suggested use of the Tire Mobility Kit
Park your car at the side of the road so that you can work with the Tire
Mobility Kit away from moving traffic.
To be sure your vehicle will not move, even when you're on fairly level
g ...
Headlamp escort
If you turn the ignition switch to the ACC or OFF position with the headlights
ON, the headlights remain on for about 20 minutes. However, if the driver’s door
is opened and closed, the headligh ...