Kia Soul: Evaporator Temperature Sensor Inspection - Air conditioning System - Heating,Ventilation And Air ConditioningKia Soul: Evaporator Temperature Sensor Inspection

Kia Soul 2014-2019 PS Service Manual / Heating,Ventilation And Air Conditioning / Air conditioning System / Evaporator Temperature Sensor Inspection

1.
Turn the ignition switch OFF.
2.
Disconnect the evaporator temperature sensor connector.
3.
Measure resistance between terminal “+” and “-” of the evaporator temperature sensor.

Specification
Evaporator core temperature
[°C (°F)]
 Resistance[KΩ]
 Voltage[V]
-10 (14)
 43.35
 2.93
0 (32)
 27.62
 2.40
10 (50)
 18.04
 1.88
20 (68)
 12.11
 1.44
30 (86)
 8.30
 1.08
40 (104)
 5.81
 0.81

4.
Connect the evaporator temperature sensor connector.
5.
Run the engine and turn the A/C switch ON, then measure the voltage between the terminals of the harness connector.
    Evaporator Temperature Sensor Description
    The evaporator temperature sensor will detect the evaporator core temperature and interrupt compressor relay power in order to prevent evaporator from freezing by excessive cooling ...

    Evaporator Temperature Sensor Replacement
    1. Disconnect the negative (-) battery terminal. 2. Remove it console side cover (A) by pushing it rearward. [RH] ...

    See also:

    Windshield washers
    In the OFF position, pull the lever gently toward you to spray washer fluid on the windshield and to run the wipers 1-3 cycles. Use this function when the windshield is dirty. The spray and wipe ...

    Side Airbag (SAB) Module. Removal
       The side airbag cannot be disassembled from the seat back assembly, so replace assembly when replacing the side airbag. ...

    Inspection
    Steering Wheel Play Inspection 1. Turn the steering wheel so that the front wheels can face straight ahead. 2. Measure the distance the ...