Kia Soul: ETC (Electronic Throttle Control) System. Repair procedures
Kia Soul 2014-2019 PS Service Manual / Engine Control / Fuel System / Engine Control System / ETC (Electronic Throttle Control) System. Repair procedures
Inspection
Throttle Position Sensor (TPS)
1. |
Connect the GDS on the Data Link Connector (DLC).
|
2. |
Start the engine and measure the output voltage of TPS 1 and 2
at C.T. and W.O.T.
|
ETC Motor
1. |
Turn the ignition switch OFF.
|
2. |
Disconnect the ETC module connector.
|
3. |
Measure resistance between the ETC module terminals 1 and 2.
|
4. |
Check that the resistance is within the specification.
|
Removal
1. |
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
|
2. |
Remove the resonator and the air intake hose.
(Refer to Engine Mechanical System - “Air Cleaner”)
|
3. |
Disconnect the ETC module connector (A).
|
4. |
Disconnect the coolant hoses (B) and vapor hose (C).
|
5. |
Remove the mounting bolts (D), and then remove the ETC module
from the engine.
|
Installation
|
1. |
Install in the reverse order of removal.
|
Adjustment
ETC module learning procedure |
When installing new ETC module or re-installing it, ETC module learning
procedure must be performed.
1. |
Hold the ignition key or the start button at the IG ON position
during 5 seconds.
|
2. |
Turn ignition swich OFF and then start the engine.
|
DTC codes (P0638, P2110) might be displayed if ETC module learning
procedure does not performed after replacing ETC module.
|
ETC (Electronic Throttle Control) System. Schematic Diagrams
Circuit Diagram (M/T) (A/T) ...Manifold Absolute Pressure Sensor (MAPS). Description and Operation
Description Manifold Absolute Pressure Sensor (MAPS) is a speed-density type sensor and is installed on the surge tank. It senses absolute pressure of the surge tank and transfers the analog ...See also:
Delete All
Press the
key
Set [
Del.All] through the
TUNE knob or
key.
Deletes all songs of My Music. ...
Temperature Control Actuator Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad lower panel.
(Refer to Body - "Crash Pad Lower Panel" ...
Function Of Safety Power Window
When driver door power window auto-up switch is operated, safety function
is activated.
1.
Safety function condition
When detect the force of 100N (usi ...