Identify MLA(Mechanical lash adjuster), valves, valve springs
as they are removed so that each item can be reinstalled in its original
position.
|
1. |
Remove the MLAs (A).
When removing MLAs, mark all the MLAs for their rearrangement.
|
|
2. |
Remove the valves.
(1) |
Using the SST (09222 - 3K000, 09222 - 3K100), compress
the valve spring and remove the retainer lock.
|
(2) |
Remove the spring retainer.
|
(3) |
Remove the valve spring.
|
(5) |
Remove the valve stem seal.
|
(6) |
Using a magnetic pickup tool, remove the spring seat.
Do not reuse the valve stem seals.
|
|
|
Engine removal is not required for this procedure.
•
Use fender covers to avoid damaging ...
Cylinder Head
1.
Inspect for flatness.
Using a precision straight edge and filler gauge, measure the
surface the contacting the cylinder block and the ...
See also:
Opening the hood
1.Pull the release lever to unlatch the hood. The hood should pop open slightly.
Open the hood after turning off the engine on a flat surface, shifting the shift
lever to the P(Park) position for ...
Components
1. Timing chain
2. Timing chain guide
3. Timing chain arm
4. Timing chain auto tensioner
5. Timing chain cover
6. Drive belt idler
7. ...
Fuel Pressure Regulator. Repair procedures
Removal
1.
Remove the fuel pump.
(Refer to Fuel Delivery System - "Fuel Pump")
...