Kia Soul: Cruise Control Switch Removal
Kia Soul 2014-2019 PS Service Manual / Engine Electrical System / Cruise Control System / Cruise Control Switch Removal
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the driver airbag module.
(Refer to the RT group)
|
| 3. |
Remove the steering wheel.
(Refer to the ST group - "Steering column & shaft")
|
| 4. |
Loosen the mounting screws from the rear steering wheel cover.
|
| 5. |
Separate the upper steering wheel remote control switch (A) from
the steering wheel.
|
| 6. |
Remove the upper steering wheel control switch (B) disconnecting
the connector (A).
|
Cruise Control Switch Inspection
[Measuring Resistance]
1.
Disconnect the cruise control switch connector from the control
switch.
2.
Measure resistanc ...
Cruise Control Switch Installation
1.
Install in the reverse order of removal.
...
See also:
Reccomendations
Use high quality ethylene glycol coolant
Your vehicle is delivered with high quality ethylene glycol coolant in the cooling
system. It is the only type of coolant that should be used because it hel ...
Installtion
1.
With a putt knife, scrape the old adhesive smooth to a thickness
of about 2mm (0.08 in.) on the bonding surface around the entire quarter
fixed glass flange.
...
Cylinder Head Removal
Engine removal is not required for this procedure.
•
Use fender covers to avoid damaging ...