Kia Soul: Cooling Fan Removal and Installation
1. |
Disconnect the battery negative terminal.
|
2. |
Remove the air duct (A).
|
3. |
Separate the filler neck (A) from the radiator upper member assembly.
|
4. |
Disconnect the radiator reservoir hose (A).
|
5. |
Remove the hood lower latch.
(Refer to Body - "Hood Latch")
|
6. |
Remove the engine room under cover.
(Refer to Engine And Transaxle Assembly - “Engine Room Under Cover”)
|
7. |
Separate the ATF cooler hoses (A) from the holders on the cooling
fan assembly. (A/T only)
|
8. |
Remove the front bumper cover.
(Refer to Body - "Front Bumper Cover")
|
9. |
Remove the headlamps.
(Refer to Body Electrical System - "Head Lamps")
|
10. |
Remove the radiator upper member assembly (A).
|
11. |
Disconnect the cooling fan connector (A).
|
12. |
Remove the cooling fan (A) from the vehicle.
|
13. |
Install in the reverse order of removal.
|
1. |
Disconnect the wire harness connector (A) and the fan motor connector
(B).
|
2. |
Remove the resistor (A) from the cooling fan shroud.
|
3. |
Install in the reverse order of removal.
|
Cooling Fan Disassembly
1. Remove the cooling fan (A) from the cooling fan assembly. 2. Disconnect the fan motor connector (A) from the resistor. ...See also:
SS-B Solenoid Valve(ON/OFF). Installation
1.
Installation is the reverse of removal.
•
...
Instrument cluster
1. Tachometer
2. Turn signal indicators
3. Speedometer
4. Engine temperature gauge
5.Warning and indicator lights
6. Trip computer*
7. Fuel gauge
* The actual cluster in the vehicle may diffe ...
Heater & A/C Control Unit (FATC) Self Diagnosis
1.
Self-diagnosis process
2.
How to read self-diagnostic code
After the display panel flickers three times every 0.5 second,
...