Kia Soul: Control Cable Installation
Kia Soul 2014-2019 PS Service Manual / Manual Transaxle System / Manual Transaxle Control System / Control Cable Installation
When installing, set room side shift lever and T/M side lever
to "4rd" gear position.
|
1. |
Tighten the nut (B) after install the retainer (A).
|
2. |
Check the Shift lever is in "4rd" gear position.
|
3. |
Install the cable socket (A) on the shift lever assembly.
|
4. |
Install the shift cable (B) after installing the clip (A).
|
5. |
Install the select cable socket (C) on the shift lever assembly.
|
6. |
Install the clip (A) after installing the select cable (B).
|
7. |
Install the bracket (A).
|
8. |
Install the rear heating joint duct (A).
|
9. |
Install the floor console assembly.
(Refer to Body - "Floor Console")
|
10. |
Rotating clockwise shift lever knob (A).
|
11. |
Install the control cable (B) and clip (A) on the bracket.
|
12. |
Install the control cable
|
13. |
Install the battery and battery tray.
(Refer to Engine Electrical System - "Battery")
|
14. |
Install the air cleaner assembly.
(Refer to Engine Mechanical System - "Air Cleaner")
|
Control Cable Removal
1. Shift lever to "4rd" gear position. 2. Rotating counter-clockwise shift lever knob (A). 3. ...Control Cable Adjustment
1. Remove the air cleaner assembly. (Refer to Engine Mechanical System - "Air Cleaner") 2. Remove the battery and battery tray ...See also:
Power steering pump, belt and hoses (if equipped)
Check the power steering pump and hoses for leakage and damage. Replace any damaged
or leaking parts immediately. Inspect the power steering belt (or drive belt) for
evidence of cuts, cracks, exce ...
Hood Assembly Component Location
1. Hood assembly
...
Heated Oxygen Sensor (HO2S). Specifications
Specification
HO2S [Bank 1/Sensor 1]
Item
Specification
Heater Resistance (Ω)
2.4 ~ 4.0 [20°C(68°F)]
HO2S [Bank 1/Sensor 2]
A/F Ra ...