Kia Soul: Brake Pedal. Installation
1. |
Pre-tighten the bracket fixing bolt (A) in dash panel.
|
2. |
Install the brake booster and brake pedal member fixing nuts (A)
securely.
|
3. |
Tighten the bolt (A) securely in dash panel.
|
4. |
Install the snap pin (A) and clevis pin (B).
|
5. |
Install the stop lamp switch securely.
|
6. |
Connect the stop lamp switch connector (A).
|
7. |
Adjust the brake pedal height and free play.
|
8. |
Check the brake pedal operation after installing the brake pedal.
|
9. |
Install the crash pad lower panel.
(Refer to Body - "Crash pad lower panel")
|
10. |
Reconnect the battery negative cable.
|
Brake Pedal. Inspection
1. Check the bushing for wear. 2. Check the brake pedal for bending or twisting. 3. Check the brake pedal retur ...Brake Switch. Removal
1. Disconnect the brake switch connector (A). 2. Pull the locking plate (A) as indicated by the arrow. 3. ...See also:
Outside Rear View Mirror Replacement
•
Put on gloves to protect your hands.
...
Warnings and indicators
All warning lights are checked by turning the ignition switch ON (do not start
the engine). Any light that does not illuminate should be checked by an authorized
Kia dealer.
After starting the en ...
Replacement
1.
Uplift the vehicle with lift.
2.
Remove the under cover.
(Refer to Engine Mechanical System - "Engine Room Under Cover")
...