Kia Soul: Brake Booster. Removal
| 1. |
Turn ignition switch OFF and disconnect the negative (-) battery
cable.
|
| 2. |
Remove the battery and battery tray.
(Refer to Engine Electrical System - "Battery")
|
| 3. |
Remove the master cylinder.
(Refer to Brake System - "Master cylinder")
|
| 4. |
Disconnect the vacuum hose (A) from the brake booster.
|
| 5. |
Disconnect the vacuum pressure sensor connector (A) from the brake
booster.
|
| 6. |
Remove the snap pin (A) and clevis pin (B).
|
| 7. |
Remove the brake booster mounting nuts (A).
|
| 8. |
Remove the brake booster (A).
|
Brake Booster Operating Test
For simple checking of the brake booster operation, carry out the following
tests.
1.
Run the engine for one or two minutes, and then stop it. If the
pedal depresses ...
Brake Booster. Inspection
1.
Inspect the check valve in the vacuum hose.
Do not remove the check va ...
See also:
Power Window Switch Inspection
Power Window Main Switch Inspection
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front door trim.
...
Exhaust Manifold Removal and Installation
1.
Remove the engine cover.
2.
Disconnect the battery negative terminal.
3.
Disconnect the front and rear oxyg ...
Climate control system
1. Fan speed control knob
2. Air intake control button
3. Mode selection knob
4. Rear window defroster button
5. Temperature control knob
6. Air conditioning button (if equipped) ...