Kia Soul: Brake Booster. Installation - Brake System - Brake SystemKia Soul: Brake Booster. Installation

Kia Soul 2014-2019 PS Service Manual / Brake System / Brake System / Brake Booster. Installation

1.
Install in the reverse order of removal.
  
A.
Before installing the pin, apply the grease to the joint pin.
B.
Use a new snap pin whenever installing.
2.
After installing, bleed the brake system.
(Refer to Brake system bleeding)
3.
After be equipped perform bleeding air procedure in clutch release cylinder after pouring the brake fluid.
(Refer to Clutch - "Clutch Release Cylinder") - [MT only]
    Brake Booster. Inspection
    1. Inspect the check valve in the vacuum hose.    Do not remove the check va ...

    Master Cylinder. Components
    1. Reservoir cap 2. Reservoir 3. Grommet 4. Master cylinder ...

    See also:

    Power Door Mirror Switch Circuit Diagram
    ...

    Positive Crankcase Ventilation (PCV) Valve Installation
    1. Install in the reverse order of removal. PCV Valve: 7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft) ...

    External Amplifier Components
    Connector Pin Information No. Connector A (12Pin) Connector B (22Pin) 1 Front door left (+) Front center (+) 2 Front door ri ...