Kia Soul: Alternator Specification - Charging System - Engine Electrical SystemKia Soul: Alternator Specification

Kia Soul 2014-2019 PS Service Manual / Engine Electrical System / Charging System / Alternator Specification

Alternator
ltem
Specification
Nominal output
13.5V, 110A
Speed in use
1,000 ~ 18,000 rpm
Voltage regulator
IC Regulator built in type
Regulator Setting Voltage
External mode
Refer to below graph
Internal mode
14.55 ± 0.3V
Temperature Gradient
External mode
0 ± 3 mV / °C 
Internal mode
-3.5 ± 2mV / °C
Target voltage data (COM)
Frequency (Hz)
115 ~ 500
Signal type
PWM
Voltage level (V)
High: 3.5 ± 0.2
Low: 1.5 ± 0.2
Electric load (FR)
Frequency (Hz)
250 ± 38
Signal type
PWM
Current limitation from vehicle (mA)
2.7 ~ 7.0

※ Regulator Setting Voltage (External mode)

    Alternator Description
    The Alternator has eight built-in diodes, each rectifying AC current to DC current. Therefore, DC current appears at alternator "B" terminal. In addition, the charging voltage ...

    Alternator Components
    1. Overrunning Alternator Decoupler (OAD) pully 2. Front bracket 3. Front bearing 4. Stator 5. Rotor 6. Rear bearing 7. Rear housing 8. Regulator assembly 9. Thr ...

    See also:

    TPMS (Tire Pressure Monitoring System) malfunction indicator
    The low tire pressure telltale will illuminate after it blinks for approximately one minute when there is a problem with the Tire Pressure Monitoring System. If the system is able to correctly d ...

    Compressor Disassembly
    1. Remove the front tire [RH]. 2. Loosen the front wheel guard mounting clips. 3. Separate the front portion of ...

    Alternator Removal
    1. Disconnect the battery negative terminal. 2. Disconnect the air compressor connector (A) and the alternator connector (B), and remove th ...