Kia Soul: Alternator Installation - Charging System - Engine Electrical SystemKia Soul: Alternator Installation

Kia Soul 2014-2019 PS Service Manual / Engine Electrical System / Charging System / Alternator Installation

1.
Install in the reverse order of removal.
2.
Adjust the alternator belt tension after installation.
(Refer to Engine Mechanical System - "Drive Belt")
Alternator mounting upper bolt:
19.6 ~ 26.5 Nm (2.0 ~ 2.7 kgf.m, 14.5 ~ 19.5 Ib-ft)
Alternator mounting low bolt:
29.4 ~ 41.2 Nm (3.0 ~ 4.2 kgf.m, 21.7 ~ 30.4 Ib-ft)
Alternator brace mounting bolt:
19.6 ~ 26.5 Nm (2.0 ~ 2.7 kgf.m, 14.5 ~ 19.5 Ib-ft)
    Alternator Removal
    1. Disconnect the battery negative terminal. 2. Disconnect the air compressor connector (A) and the alternator connector (B), and remove th ...

    Alternator Disassembly
    1. Remove the rear cover (A) after removing nuts. 2. Remove the mounting bolts (A) and the brush holder assembly (B). ...

    See also:

    Evaporator Temperature Sensor Replacement
    1. Disconnect the negative (-) battery terminal. 2. Remove it console side cover (A) by pushing it rearward. [RH] ...

    Relay Box (Engine Compartment) Component Location
    ...

    Injector. Description and Operation
    Description The GDI injector is similar to a standard injector, but sprays fuel at a much higher pressure directly into the combustion chamber and has a swirl disc to get the fuel swirling a ...