•
|
Put on gloves to protect your hands.
|
|
•
|
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related
parts, to prevent damage.
|
•
|
Take care not to scratch the body surface.
|
|
1. |
After loosening the mounting screw, then remove the A pillar garnish
(A) by using a screw driver.
• |
Relplace the A pillar garnish to a new one.
|
|
|
2. |
Install in the reverse order of removal.
• |
Replace any damaged clips.
|
|
|
•
Put on gloves to protect your hands.
...
•
Put on gloves to protect your hands.
...
See also:
Installation
If reinstalling used cover, the cover should be installed with
its clutch disc as a set.
1 ...
Seat Heater (Non-Air Ventilation) Components
...
Description
Automatic transaxle system relies on various measurement data to determine
the current control status and extrapolate the necessary compensation values.
These values are used to control the a ...