Kia Soul: A/C Pressure Transducer Replacement - Air conditioning System - Heating,Ventilation And Air ConditioningKia Soul: A/C Pressure Transducer Replacement

Kia Soul 2014-2019 PS Service Manual / Heating,Ventilation And Air Conditioning / Air conditioning System / A/C Pressure Transducer Replacement

1.
Disconnect the negative (-) battery terminal.
2.
Recover the refrigerant with a recovery/charging station.
3.
Disconnect the A/C pressure transducer connector (A).
4.
Remove the A/C pressure transducer (B).
Tightening torque :
10 ~ 12 N.m (1.02 ~ 1.22 kgf.m, 7.4 ~ 8.8 lb-ft)

  
Be careful not to bend the liquid & suction pipe.
5.
Install in the reverse order of removal.
  
When installing, replace it with a new O-ring (A).

    A/C Pressure Transducer Inspection
    1. Measure the pressure of high pressure line by measuring voltage output between terminal “1” and “2”. 2. Inspect the volt ...

    Evaporator Temperature Sensor Description
    The evaporator temperature sensor will detect the evaporator core temperature and interrupt compressor relay power in order to prevent evaporator from freezing by excessive cooling ...

    See also:

    Installation
    1. Install the boot (A). 2. Install the clip to the clutch release fork. 3. Apply to grease in location ...

    Receiver-Drier Replacement
    1. Remove the condenser. 2. Remove the cap (B) on the bottom of the condenser with a L wrench (A). Tightening to ...

    Light bulbs
    WARNING - Working on the lights Prior to working on the light, firmly apply the parking brake, ensure that the ignition switch is turned to the LOCK position and turn off the lights to avoid sudd ...